{"title":"Brake transference","description":"\u003cp\u003eBrake rods, equalizing yokes and fork heads that carry the braking force from the overrun brake out to the wheel brakes.\u003c\/p\u003e","products":[{"product_id":"nut-m8-long-for-trailer-brake-rod-l-50-1339000","title":"Nut M8 long for trailer brake rod L=50","description":"\u003cul\u003e\n\u003cli\u003eLong nut with an M8 thread for a trailer brake rod\u003c\/li\u003e\n\u003cli\u003eLength 50 mm\u003c\/li\u003e\n\u003cli\u003eThe same nut in M10 is article 1339002\u003c\/li\u003e\n\u003cli\u003eCheck the thread on your brake rod before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eNut M8 long for trailer brake rod\u003c\/h2\u003e\n\u003cp\u003eLong nut with an M8 thread for a trailer brake rod, with a length of 50 mm. The same nut with an M10 thread is article 1339002, so check which thread your brake rod carries before ordering.\u003c\/p\u003e\n\u003ch3\u003eLong nuts on a brake rod\u003c\/h3\u003e\n\u003cp\u003eThe extra length of a long nut gives more thread engagement than a standard nut, which is what lets the length of a brake rod joint be set and then held while the rod is under a steady pull. Because that setting decides how soon the brakes take hold, adjust the wheel brakes first and set the rod afterwards, then make sure the rod is wound far enough into the nut before locking it. Check the thread for damage when the linkage is dismantled.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095835103574,"sku":"1339000","price":5.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1339000.jpg?v=1788815915"},{"product_id":"nut-m10-long-for-trailer-brake-rod-l-50-1339002","title":"Nut M10 long for trailer brake rod L=50","description":"\u003cul\u003e\n\u003cli\u003eLong nut with an M10 thread for a trailer brake rod\u003c\/li\u003e\n\u003cli\u003eLength 50 mm, fully threaded\u003c\/li\u003e\n\u003cli\u003eThe same nut in M8 is article 1339000\u003c\/li\u003e\n\u003cli\u003eCheck the thread on your brake rod before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eNut M10 long for trailer brake rod\u003c\/h2\u003e\n\u003cp\u003eLong nut with an M10 thread for a trailer brake rod, 50 mm long and fully threaded, so the thread runs through the whole nut. The M8 version of the same length is article 1339000.\u003c\/p\u003e\n\u003ch3\u003eLong nuts on a brake rod\u003c\/h3\u003e\n\u003cp\u003eThe extra length of a long nut gives more thread engagement than a standard nut, which is what lets the length of a brake rod joint be set and then held while the rod is under a steady pull. Because that setting decides how soon the brakes take hold, adjust the wheel brakes first and set the rod afterwards, then make sure the rod is wound far enough into the nut before locking it. Check the thread for damage when the linkage is dismantled.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095835529558,"sku":"1339002","price":7.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1339002.jpg?v=1788815914"},{"product_id":"equalizing-yoke-knott-for-wire-with-crimped-dome-ball-nut-bogie-1469000","title":"Equalizing yoke Knott for wire with crimped dome\/ball nut, Bogie","description":"\u003cul\u003e\n\u003cli\u003eEqualizing yoke for brake wire with a crimped dome or ball nut\u003c\/li\u003e\n\u003cli\u003eFor bogie installations\u003c\/li\u003e\n\u003cli\u003eFits Knott\u003c\/li\u003e\n\u003cli\u003eOriginal number 009000582\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eEqualizing yoke Knott for wire, bogie\u003c\/h2\u003e\n\u003cp\u003eEqualizing yoke for brake wire with a crimped dome or ball nut, for bogie installations. It fits Knott. Original number 009000582.\u003c\/p\u003e\n\u003ch3\u003eWhat the equalizing yoke does\u003c\/h3\u003e\n\u003cp\u003eThe yoke sits between the pull coming from the coupling and the wires that run out to the wheel brakes, and it pivots so that pull is divided between them instead of loading one brake harder than the other. That makes it a useful check after adjusting the brakes: with the brakes set evenly the yoke stands square to the direction of pull, and a yoke sitting skewed points back at the adjustment rather than at the yoke. Check that it pivots freely and that the seats and pins are not worn.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/installation-video-for-knott-brakes\"\u003eSee our installation film for Knott brakes\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095869444438,"sku":"1469000","price":42.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469000.jpg?v=1788816018"},{"product_id":"equalizing-yoke-for-wire-with-ball-nut-1469002","title":"Equalizing yoke for wire with ball nut","description":"\u003cul\u003e\n\u003cli\u003eEqualizing yoke for brake wire fitted with a ball nut\u003c\/li\u003e\n\u003cli\u003eOriginal number 009000575\u003c\/li\u003e\n\u003cli\u003eCheck the wire end and the yoke seat against your own installation before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eEqualizing yoke for wire with ball nut\u003c\/h2\u003e\n\u003cp\u003eEqualizing yoke for brake wire fitted with a ball nut, which is the end the wire seats into the yoke with. Original number 009000575.\u003c\/p\u003e\n\u003ch3\u003eWhat the equalizing yoke does\u003c\/h3\u003e\n\u003cp\u003eThe yoke sits between the pull coming from the coupling and the wires that run out to the wheel brakes, and it pivots so that pull is divided between them instead of loading one brake harder than the other. That makes it a useful check after adjusting the brakes: with the brakes set evenly the yoke stands square to the direction of pull, and a yoke sitting skewed points back at the adjustment rather than at the yoke. Check that it pivots freely and that the seats and pins are not worn.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095871508822,"sku":"1469002","price":27.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469002.jpg?v=1788816018"},{"product_id":"equalizing-yoke-u-profile-for-wire-with-crimped-dome-ball-nut-1469003","title":"Equalizing yoke U-profile for wire with crimped dome\/ball nut","description":"\u003cul\u003e\n\u003cli\u003eEqualizing yoke in U-profile, for wire with a crimped dome or ball nut\u003c\/li\u003e\n\u003cli\u003eOriginal number 2385760002\u003c\/li\u003e\n\u003cli\u003eThree of these are included in the tandem brake rod kit 1469014\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eEqualizing yoke U-profile for trailer brake wire\u003c\/h2\u003e\n\u003cp\u003eEqualizing yoke in U-profile, for wire with a crimped dome or ball nut. Original number 2385760002. The same article is used in the tandem brake rod kit 1469014, which contains three of them.\u003c\/p\u003e\n\u003ch3\u003eWhat the equalizing yoke does\u003c\/h3\u003e\n\u003cp\u003eThe yoke sits between the pull coming from the coupling and the wires that run out to the wheel brakes, and it pivots so that pull is divided between them instead of loading one brake harder than the other. That makes it a useful check after adjusting the brakes: with the brakes set evenly the yoke stands square to the direction of pull, and a yoke sitting skewed points back at the adjustment rather than at the yoke. Check that it pivots freely and that the seats and pins are not worn.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095871639894,"sku":"1469003","price":23.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469003.jpg?v=1788816018"},{"product_id":"fork-head-m10-72-mm-cc-60-1469004","title":"Fork head M10, 72 mm CC=60","description":"\u003cul\u003e\n\u003cli\u003eFork head with an M10 thread, given as 72 mm with CC=60\u003c\/li\u003e\n\u003cli\u003eManufactured by BPW and fits BPW\u003c\/li\u003e\n\u003cli\u003eBrake ID ZAF 1,0-2\u003c\/li\u003e\n\u003cli\u003eOriginal number 02.1201.02.12\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eFork head M10 for trailer, BPW\u003c\/h2\u003e\n\u003cp\u003eFork head with an M10 thread, listed as 72 mm with a centre distance of 60. It is manufactured by BPW and fits BPW, with brake ID ZAF 1,0-2 and original number 02.1201.02.12.\u003c\/p\u003e\n\u003ch3\u003eFork heads in the brake linkage\u003c\/h3\u003e\n\u003cp\u003eA fork head is wound onto a threaded rod and takes a pin through its two ears, which is what lets the linkage pivot as the overrun coupling works in and out. Because it screws onto the rod, how far it is wound on also sets the working length of the linkage, so it is locked once the brakes are adjusted. Check the pin and the holes it passes through for wear, since play there shows up as lost travel before the brakes take hold.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BPW","offers":[{"title":"Default Title","offer_id":54095871803734,"sku":"1469004","price":7.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469004.jpg?v=1788816018"},{"product_id":"equalizing-yoke-al-ko-for-wire-with-crimped-dome-ball-nut-bogie-1469008","title":"Equalizing yoke AL-KO for wire with crimped dome\/ball nut, Bogie","description":"\u003cul\u003e\n\u003cli\u003eEqualizing yoke for brake wire with a crimped dome or ball nut\u003c\/li\u003e\n\u003cli\u003eFor bogie installations\u003c\/li\u003e\n\u003cli\u003eFits AL-KO\u003c\/li\u003e\n\u003cli\u003eOriginal number 2088890003\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eEqualizing yoke AL-KO for wire, bogie\u003c\/h2\u003e\n\u003cp\u003eEqualizing yoke for brake wire with a crimped dome or ball nut, for bogie installations. It fits AL-KO. Original number 2088890003.\u003c\/p\u003e\n\u003ch3\u003eWhat the equalizing yoke does\u003c\/h3\u003e\n\u003cp\u003eThe yoke sits between the pull coming from the coupling and the wires that run out to the wheel brakes, and it pivots so that pull is divided between them instead of loading one brake harder than the other. That makes it a useful check after adjusting the brakes: with the brakes set evenly the yoke stands square to the direction of pull, and a yoke sitting skewed points back at the adjustment rather than at the yoke. Check that it pivots freely and that the seats and pins are not worn.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/installation-video-for-al-ko-brakes\"\u003eSee our installation film for AL-KO brakes\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095872065878,"sku":"1469008","price":35.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469008.jpg?v=1788816026"},{"product_id":"equalizing-yoke-for-wire-bpw-knott-bogie-m8-1469012","title":"Equalizing yoke for wire BPW\/Knott Bogie M8","description":"\u003cul\u003e\n\u003cli\u003eEqualizing yoke for brake wire, M8\u003c\/li\u003e\n\u003cli\u003eFor bogie installations\u003c\/li\u003e\n\u003cli\u003eFits BPW and Knott\u003c\/li\u003e\n\u003cli\u003eOriginal number 009000580\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eEqualizing yoke M8 for wire, BPW and Knott bogie\u003c\/h2\u003e\n\u003cp\u003eEqualizing yoke for brake wire with an M8 thread, for bogie installations. It fits BPW and Knott. Original number 009000580.\u003c\/p\u003e\n\u003ch3\u003eWhat the equalizing yoke does\u003c\/h3\u003e\n\u003cp\u003eThe yoke sits between the pull coming from the coupling and the wires that run out to the wheel brakes, and it pivots so that pull is divided between them instead of loading one brake harder than the other. That makes it a useful check after adjusting the brakes: with the brakes set evenly the yoke stands square to the direction of pull, and a yoke sitting skewed points back at the adjustment rather than at the yoke. Check that it pivots freely and that the seats and pins are not worn.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095872164182,"sku":"1469012","price":45.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469012.jpg?v=1788816018"},{"product_id":"trailer-brake-rod-with-equalizing-yoke-m10-2m-2x1-m-1469013","title":"Trailer brake rod with Equalizing yoke M10, 2m (2x1 m)","description":"\u003cdiv\u003eWhat is included\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003e4060010 Brake rod 2m (2x1m) M10\u003c\/div\u003e\u003cdiv\u003e4020146 1 x M10 Turnbuckle M10 High\/We threaded\u003c\/div\u003e\u003cdiv\u003e1469003 1 levelling yoke U-profile\u003c\/div\u003e\u003cdiv\u003e6468001 2 pcs Nut M10 right\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095872360790,"sku":"1469013","price":35.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469013.jpg?v=1788816018"},{"product_id":"trailer-brake-rod-with-equalizing-yoke-m10-tandem-1469014","title":"Trailer brake rod with Equalizing yoke M10 tandem","description":"\u003cdiv\u003eThe item consists of \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003e4020146 x 1 \u003c\/div\u003e\u003cdiv\u003e1469003 x 3 \u003c\/div\u003e\u003cdiv\u003e6468001 x 2 \u003c\/div\u003e\u003cdiv\u003e4010037 x 2 \u003c\/div\u003e\u003cdiv\u003e4060008 x 1 \u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095872491862,"sku":"1469014","price":56.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469014.jpg?v=1788816019"},{"product_id":"brake-cable-bracket-25x3cm-1469016","title":"Brake Cable Bracket 25x3cm","description":"\u003cul\u003e\n\u003cli\u003eBracket for a trailer brake cable\u003c\/li\u003e\n\u003cli\u003eSize 25x3 cm\u003c\/li\u003e\n\u003cli\u003eOriginal number 2088890003\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake cable bracket 25x3 cm for trailer\u003c\/h2\u003e\n\u003cp\u003eBracket for a brake cable, 25x3 cm. Original number 2088890003.\u003c\/p\u003e\n\u003ch3\u003eRouting the brake cable on a trailer\u003c\/h3\u003e\n\u003cp\u003eA bracket holds the brake cable on a fixed path along the frame so it is not left hanging or rubbing against something that moves, and so the cable enters the brake in a straight pull rather than around a bend. A cable that is allowed to move about wears at whatever it touches and the play shows up as a soft brake. Check that the cable runs freely in the bracket and that the fixing has not worked loose.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095872622934,"sku":"1469016","price":27.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469016.jpg?v=1788816026"},{"product_id":"ball-nut-long-m10-l-35-conical-1470000","title":"Ball nut long M10 L=35 conical","description":"\u003cul\u003e\n\u003cli\u003eTapered at one end — the version without the taper is article 1470105\u003c\/li\u003e\n\u003cli\u003eLong ball nut with an M10 thread, 35 mm long\u003c\/li\u003e\n\u003cli\u003eCheck thread and length against the part you are fitting it to\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBall nut long M10 L=35 conical for trailer\u003c\/h2\u003e\n\u003cp\u003eLong ball nut with an M10 thread and a length of 35 mm, tapered at one end. The taper is what separates it from article 1470105, which carries the same thread and the same length, so choose the one that matches the seat in the part you are fitting it into.\u003c\/p\u003e\n\u003ch3\u003eBall nuts on trailer brake linkage\u003c\/h3\u003e\n\u003cp\u003eA long ball nut is wound onto a threaded rod or wire end and forms the rounded head that the next part of the linkage seats against, so the pull is passed on without the joint binding as it pivots. How far the nut is wound on also sets the working length of the linkage, which is why it is set after the wheel brakes are adjusted and then locked. Inspect the thread for damage whenever the linkage is dismantled.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095874589014,"sku":"1470000","price":11.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1470000.jpg?v=1788816026"},{"product_id":"ball-nut-long-m10-l-35-1470105","title":"Ball nut long M10 L=35","description":"\u003cul\u003e\n\u003cli\u003eLong ball nut with an M10 thread, 35 mm long\u003c\/li\u003e\n\u003cli\u003ePartially threaded\u003c\/li\u003e\n\u003cli\u003eThe version tapered at one end is article 1470000\u003c\/li\u003e\n\u003cli\u003eCheck thread and length against the part you are fitting it to\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBall nut long M10 L=35 for trailer\u003c\/h2\u003e\n\u003cp\u003eLong ball nut with an M10 thread and a length of 35 mm. It is partially threaded, so the thread does not run through the whole length of the nut. The version that is tapered at one end has the same thread and length and is listed separately as article 1470000.\u003c\/p\u003e\n\u003ch3\u003eBall nuts on trailer brake linkage\u003c\/h3\u003e\n\u003cp\u003eA long ball nut is wound onto a threaded rod or wire end and forms the rounded head that the next part of the linkage seats against, so the pull is passed on without the joint binding as it pivots. How far the nut is wound on also sets the working length of the linkage, which is why it is set after the wheel brakes are adjusted and then locked. Inspect the thread for damage whenever the linkage is dismantled.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095875047766,"sku":"1470105","price":3.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1470105.jpg?v=1788816026"},{"product_id":"trailer-brake-rod-right-left-500-mm-m10-2048001","title":"Trailer brake rod Right\/Left 500 mm M10","description":"\u003cul\u003e\n\u003cli\u003eTrailer brake rod, 500 mm total length, M10 thread\u003c\/li\u003e\n\u003cli\u003eThe same rod is listed for the right and the left side\u003c\/li\u003e\n\u003cli\u003eSupplied without nuts\u003c\/li\u003e\n\u003cli\u003eBrake rod holders are listed as separate articles: 2049002 front and 2049001 rear\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake rod 500 mm M10 for trailer\u003c\/h2\u003e\n\u003cp\u003eTrailer brake rod with a total length of 500 mm and M10 thread, listed for both the right and the left side. It is supplied without nuts, so order those separately if the old ones are not being reused. Brake rod holders are listed as their own articles, 2049002 for the front position and 2049001 for the rear.\u003c\/p\u003e\n\u003ch3\u003eThe brake rod in the linkage\u003c\/h3\u003e\n\u003cp\u003eThe brake rod is a threaded rod in the trailer's brake linkage, so both the length and the thread have to match what is already fitted - a rod of the wrong length cannot be made up correctly by adjustment alone. Check the thread over its full length and make sure the rod is straight before putting it back into service.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095892021590,"sku":"2048001","price":31.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2048001.jpg?v=1788816049"},{"product_id":"trailer-brake-rod-holder-rear-2049001","title":"Trailer brake rod holder rear","description":"\u003cul\u003e\n\u003cli\u003eHolder for the trailer brake rod, rear position\u003c\/li\u003e\n\u003cli\u003eOriginal number 228827\u003c\/li\u003e\n\u003cli\u003eThe holder for the front position is article 2049002\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake rod holder rear for trailer\u003c\/h2\u003e\n\u003cp\u003eHolder for the trailer brake rod, for the rear position. Original number 228827. The holder for the front position is a separate part and is listed as article 2049002.\u003c\/p\u003e\n\u003ch3\u003eSupporting the brake rod\u003c\/h3\u003e\n\u003cp\u003eThe holder supports the brake rod along its run, so the rod stays in position instead of moving where it is not meant to. The front and the rear holder are separate parts, so check which position is worn before ordering, and look the rod over while the holder is off.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095892316502,"sku":"2049001","price":11.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2049001.jpg?v=1788816056"},{"product_id":"trailer-brake-rod-holder-front-2049002","title":"Trailer brake rod holder front","description":"\u003cul\u003e\n\u003cli\u003eHolder for the trailer brake rod, front position\u003c\/li\u003e\n\u003cli\u003eOriginal number 2289860007\u003c\/li\u003e\n\u003cli\u003eThe holder for the rear position is article 2049001\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake rod holder front for trailer\u003c\/h2\u003e\n\u003cp\u003eHolder for the trailer brake rod, for the front position. Original number 2289860007. The holder for the rear position is a separate part and is listed as article 2049001.\u003c\/p\u003e\n\u003ch3\u003eSupporting the brake rod\u003c\/h3\u003e\n\u003cp\u003eThe holder supports the brake rod along its run, so the rod stays in position instead of moving where it is not meant to. The front and the rear holder are separate parts, so check which position is worn before ordering, and look the rod over while the holder is off.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095892676950,"sku":"2049002","price":5.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2049002.jpg?v=1788816055"},{"product_id":"rigging-screw-m10-right-left-threaded-nut-2589000","title":"Rigging screw M10 Right\/Left threaded + nut","description":"\u003cul\u003e\n\u003cli\u003eRigging screw with M10 thread\u003c\/li\u003e\n\u003cli\u003eRight-hand thread at one end, left-hand at the other\u003c\/li\u003e\n\u003cli\u003eSupplied with nut\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eRigging screw M10 for trailer\u003c\/h2\u003e\n\u003cp\u003eRigging screw with M10 thread, right-hand threaded at one end and left-hand at the other, supplied with a nut.\u003c\/p\u003e\n\u003ch3\u003eHow a rigging screw works\u003c\/h3\u003e\n\u003cp\u003eBecause one end is right-hand threaded and the other left-hand, turning the body draws the two ends together or lets them out without either end having to rotate. That makes it a straightforward way to take up slack in a wire or a stay. Tighten the nut against the body once the length is set, so the setting cannot turn itself loose.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54096055075158,"sku":"2589000","price":11.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2589000.jpg?v=1788816303"},{"product_id":"rigging-screw-m12-right-left-threaded-2589002","title":"Rigging screw M12 Right\/Left threaded","description":"\u003cul\u003e\n\u003cli\u003eRigging screw in M12, with one right-hand and one left-hand thread\u003c\/li\u003e\n\u003cli\u003eOriginal number BS-8170\u003c\/li\u003e\n\u003cli\u003eThe M10 version is article 4020146\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eRigging screw M12 right\/left threaded\u003c\/h2\u003e\n\u003cp\u003eRigging screw in M12 with one right-hand and one left-hand thread. Original number BS-8170. The same screw in M10 is article 4020146. No length or material is stated for it.\u003c\/p\u003e\n\u003ch3\u003eWhat the opposed threads are for\u003c\/h3\u003e\n\u003cp\u003eWith one thread cut right-hand and the other left-hand, turning the body draws both ends in or lets both out at once, so the length can be changed with the ends still attached. That is what makes a rigging screw an adjuster rather than a plain fastener. Set it so both threads are engaged by a similar amount instead of running one out to its last turns, and lock the setting once it is right so vibration does not take the adjustment with it.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54096055271766,"sku":"2589002","price":14.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2589002.jpg?v=1788816304"},{"product_id":"fork-head-m8-cc-48-mm-total-length-58-mm-2-pack-4010036","title":"Fork head M8, CC=48 mm total length 58 mm, (2 pack)","description":"\u003cul\u003e\n\u003cli\u003eWheel brake dimensions: 230x40\u003c\/li\u003e\n\u003cli\u003eManufacturer: PEITZ\u003c\/li\u003e\n\u003cli\u003eBrake ID: 120 SR\/1\u003c\/li\u003e\n\u003cli\u003eOriginal number: 05.171.50.06.0\u003c\/li\u003e\n\u003cli\u003eBrand \/ Fits for: AL-KO\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PEITZ","offers":[{"title":"Default Title","offer_id":54096391307606,"sku":"4010036","price":20.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/4010036.jpg?v=1788817222"},{"product_id":"trailer-brake-rod-right-left-length-500-mm-m8-incl-nuts-4020136","title":"Trailer brake rod Right\/Left Length 500 mm M8 incl. nuts","description":"\u003cul\u003e\n\u003cli\u003eWheel brake dimensions: 230x40\u003c\/li\u003e\n\u003cli\u003eManufacturer: HAHN\u003c\/li\u003e\n\u003cli\u003eTotal length: 500 mm\u003c\/li\u003e\n\u003cli\u003eLength: 500,00 mm\u003c\/li\u003e\n\u003cli\u003eBrake ID: B 201-1\u003c\/li\u003e\n\u003cli\u003eOriginal number: 009000560\u003c\/li\u003e\n\u003cli\u003eBrand \/ Fits for: HAHN\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HAHN","offers":[{"title":"Default Title","offer_id":54096428564822,"sku":"4020136","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/4020136.jpg?v=1788817322"},{"product_id":"rigging-screw-m8-right-left-threaded-4020137","title":"Rigging screw M8 Right\/Left threaded","description":"\u003cul\u003e\n\u003cli\u003eWheel brake dimensions: 230x40\u003c\/li\u003e\n\u003cli\u003eManufacturer: PEITZ\u003c\/li\u003e\n\u003cli\u003eBrake ID: PAV\/SR 1,3 M\u003c\/li\u003e\n\u003cli\u003eOriginal number: 009000501\u003c\/li\u003e\n\u003cli\u003eBrand \/ Fits for: BPW\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PEITZ","offers":[{"title":"Default Title","offer_id":54096428859734,"sku":"4020137","price":13.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/4020137.jpg?v=1788817322"},{"product_id":"rigging-screw-m10-right-left-threaded-4020146","title":"Rigging screw M10 Right\/Left threaded","description":"\u003cul\u003e\n\u003cli\u003eRigging screw in M10, with one right-hand and one left-hand thread\u003c\/li\u003e\n\u003cli\u003eOriginal number 009000506\u003c\/li\u003e\n\u003cli\u003eThe M12 version is article 2589002\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eRigging screw M10 right\/left threaded\u003c\/h2\u003e\n\u003cp\u003eRigging screw in M10 with one right-hand and one left-hand thread. Original number 009000506. The same screw in M12 is article 2589002. No length or material is stated for it.\u003c\/p\u003e\n\u003ch3\u003eWhat the opposed threads are for\u003c\/h3\u003e\n\u003cp\u003eWith one thread cut right-hand and the other left-hand, turning the body draws both ends in or lets both out at once, so the length can be changed with the ends still attached. That is what makes a rigging screw an adjuster rather than a plain fastener. Set it so both threads are engaged by a similar amount instead of running one out to its last turns, and lock the setting once it is right so vibration does not take the adjustment with it.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54096429711702,"sku":"4020146","price":10.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/4020146.jpg?v=1788817322"},{"product_id":"trailer-brake-rod-right-left-length-160-mm-with-fork-head-m8-4060004","title":"Trailer brake rod Right\/Left Length 160 mm with fork head M8","description":"\u003cul\u003e\n\u003cli\u003eWheel brake dimensions: 160x35\u003c\/li\u003e\n\u003cli\u003eManufacturer: PEITZ\u003c\/li\u003e\n\u003cli\u003eTotal length: 160 mm\u003c\/li\u003e\n\u003cli\u003eLength: 160,00 mm\u003c\/li\u003e\n\u003cli\u003eBrake ID: PAV\/SR 0,7\u003c\/li\u003e\n\u003cli\u003eOriginal number: 009000501\u003c\/li\u003e\n\u003cli\u003eBrand \/ Fits for: BPW\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PEITZ","offers":[{"title":"Default Title","offer_id":54096430104918,"sku":"4060004","price":13.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/4060004.jpg?v=1788817323"},{"product_id":"trailer-brake-rod-2m-2x1m-m8-4060008","title":"Trailer brake rod 2m (2x1m) M8","description":"\u003cul\u003e\n\u003cli\u003eTrailer brake rod with M8 thread — the M10 version is article 4060010\u003c\/li\u003e\n\u003cli\u003eTotal length 2000 mm, supplied as 2 x 1 m\u003c\/li\u003e\n\u003cli\u003eOriginal number 009000521\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eTrailer brake rod 2 m M8 for trailer\u003c\/h2\u003e\n\u003cp\u003eBrake rod with a total length of 2000 mm, supplied as 2 x 1 m, that is two lengths of 1000 mm, with M8 thread. Original number 009000521. The same rod with M10 thread is article 4060010.\u003c\/p\u003e\n\u003ch3\u003eThe brake rod in the linkage\u003c\/h3\u003e\n\u003cp\u003eThe brake rod passes the pull from the overrun coupling back to the wheel brakes, so its working length is part of how the brakes are adjusted rather than a fixed figure, and slack anywhere in the linkage shows up as brakes that bite late. Check the rod for straightness and the threads for corrosion while the brakes are apart, since a rod that has been bent will not pull true. The thread size has to match the parts it screws into.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/how-do-i-adjust-brakes-from-knott\"\u003eSee our guide to adjusting brakes from Knott\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54096430235990,"sku":"4060008","price":15.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/4060008.jpg?v=1788817325"},{"product_id":"trailer-brake-rod-2m-2x1m-m10-4060010","title":"Trailer brake rod 2m (2x1m) M10","description":"\u003cul\u003e\n\u003cli\u003eTrailer brake rod with M10 thread — the M8 version is article 4060008\u003c\/li\u003e\n\u003cli\u003eTotal length 2000 mm, supplied as 2 x 1 m\u003c\/li\u003e\n\u003cli\u003eOriginal number 009000525\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eTrailer brake rod 2 m M10 for trailer\u003c\/h2\u003e\n\u003cp\u003eBrake rod with a total length of 2000 mm, supplied as 2 x 1 m, that is two lengths of 1000 mm, with M10 thread. Original number 009000525. The same rod with M8 thread is article 4060008.\u003c\/p\u003e\n\u003ch3\u003eThe brake rod in the linkage\u003c\/h3\u003e\n\u003cp\u003eThe brake rod passes the pull from the overrun coupling back to the wheel brakes, so its working length is part of how the brakes are adjusted rather than a fixed figure, and slack anywhere in the linkage shows up as brakes that bite late. Check the rod for straightness and the threads for corrosion while the brakes are apart, since a rod that has been bent will not pull true. The thread size has to match the parts it screws into.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/how-do-i-adjust-brakes-from-knott\"\u003eSee our guide to adjusting brakes from Knott\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54096430563670,"sku":"4060010","price":17.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/4060010.jpg?v=1788817324"},{"product_id":"nut-m10-right-6468001","title":"Nut M10 Right","description":"\u003cul\u003e\n\u003cli\u003eM10 thread\u003c\/li\u003e\n\u003cli\u003eRight-hand thread\u003c\/li\u003e\n\u003cli\u003eOriginal number 375724\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eNut M10 with right-hand thread\u003c\/h2\u003e\n\u003cp\u003eNut with an M10 right-hand thread. Original number 375724.\u003c\/p\u003e\n\u003ch3\u003eRight-hand and left-hand threads\u003c\/h3\u003e\n\u003cp\u003eA right-hand nut tightens clockwise and is the standard thread on most fixings. Where a left-hand thread is used, the two are not interchangeable — a nut of the wrong hand will not run on, and forcing it damages the thread it is fitted to. Check which hand of thread the fixing has before ordering, and compare the original number if the part is being replaced on an existing installation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54096472736086,"sku":"6468001","price":0.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/6468001.jpg?v=1788817413"},{"product_id":"nut-m8-left-6469001","title":"Nut M8 Left","description":"\u003cul\u003e\n\u003cli\u003eNut with M8 left-hand thread\u003c\/li\u003e\n\u003cli\u003eOriginal number BS-8420\u003c\/li\u003e\n\u003cli\u003eThe same nut in M10 is article 6469002\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eNut M8 with left-hand thread\u003c\/h2\u003e\n\u003cp\u003eNut with an M8 left-hand thread. Original number BS-8420. The larger size in the pair is the M10 nut, article 6469002.\u003c\/p\u003e\n\u003ch3\u003eLeft-hand threads\u003c\/h3\u003e\n\u003cp\u003eA left-hand nut tightens anticlockwise, the opposite way to a standard nut, and is used where a normal thread would work itself loose from the direction the part turns. It is not interchangeable with a right-hand nut of the same size: it will not run onto a right-hand thread, and forcing it damages both parts. Check which hand of thread the fixing uses before ordering, and keep left-hand and right-hand nuts apart in the toolbox.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54096472834390,"sku":"6469001","price":1.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/6469001.jpg?v=1788817412"},{"product_id":"nut-m10-left-6469002","title":"Nut m10 Left","description":"\u003cul\u003e\n\u003cli\u003eNut with M10 left-hand thread\u003c\/li\u003e\n\u003cli\u003eOriginal number BS-8410\u003c\/li\u003e\n\u003cli\u003eThe same nut in M8 is article 6469001\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eNut M10 with left-hand thread\u003c\/h2\u003e\n\u003cp\u003eNut with an M10 left-hand thread. Original number BS-8410. The smaller size in the pair is the M8 nut, article 6469001.\u003c\/p\u003e\n\u003ch3\u003eLeft-hand threads\u003c\/h3\u003e\n\u003cp\u003eA left-hand nut tightens anticlockwise, the opposite way to a standard nut, and is used where a normal thread would work itself loose from the direction the part turns. It is not interchangeable with a right-hand nut of the same size: it will not run onto a right-hand thread, and forcing it damages both parts. Check which hand of thread the fixing uses before ordering, and keep left-hand and right-hand nuts apart in the toolbox.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54096472998230,"sku":"6469002","price":1.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/6469002.jpg?v=1788817413"},{"product_id":"sl-clip-8x12-6999001","title":"SL clip 8x12","description":"\u003cul\u003e\n\u003cli\u003eSL clip 8x12\u003c\/li\u003e\n\u003cli\u003eFor wheel brakes with the dimension 230x40 mm\u003c\/li\u003e\n\u003cli\u003eBrake ID AE 1,0-1\u003c\/li\u003e\n\u003cli\u003eManufacturer HAHN\u003c\/li\u003e\n\u003cli\u003eListed for BPW\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eSL clip 8x12 for trailer brakes\u003c\/h2\u003e\n\u003cp\u003eSL clip in size 8x12 for wheel brakes with the dimension 230x40 mm. The clip is made by HAHN and is listed for BPW, under brake ID AE 1,0-1.\u003c\/p\u003e\n\u003ch3\u003eMatching a part to your brake\u003c\/h3\u003e\n\u003cp\u003eBrake parts are matched by the brake dimension and the brake ID rather than by the model of the trailer, so check the dimension and the ID on your own brake against the figures above before ordering. Where a brake has been repaired before, the parts on it are not always the ones the axle left the factory with, which is why the figures on the brake itself decide.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HAHN","offers":[{"title":"Default Title","offer_id":54096629760342,"sku":"6999001","price":1.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/6999001.jpg?v=1788817809"}],"url":"https:\/\/valeryd.com\/collections\/brake-transference.oembed","provider":"Valeryd","version":"1.0","type":"link"}