{"title":"Couplings","description":"\u003cp\u003eOverrun brakes, coupling heads, drawtubes and the parts that pass braking from the tow vehicle to the trailer. Start from the trailer's weight class and the brake already fitted.\u003c\/p\u003e","products":[{"product_id":"nut-m8-long-for-trailer-brake-rod-l-50-1339000","title":"Nut M8 long for trailer brake rod L=50","description":"\u003cul\u003e\n\u003cli\u003eLong nut with an M8 thread for a trailer brake rod\u003c\/li\u003e\n\u003cli\u003eLength 50 mm\u003c\/li\u003e\n\u003cli\u003eThe same nut in M10 is article 1339002\u003c\/li\u003e\n\u003cli\u003eCheck the thread on your brake rod before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eNut M8 long for trailer brake rod\u003c\/h2\u003e\n\u003cp\u003eLong nut with an M8 thread for a trailer brake rod, with a length of 50 mm. The same nut with an M10 thread is article 1339002, so check which thread your brake rod carries before ordering.\u003c\/p\u003e\n\u003ch3\u003eLong nuts on a brake rod\u003c\/h3\u003e\n\u003cp\u003eThe extra length of a long nut gives more thread engagement than a standard nut, which is what lets the length of a brake rod joint be set and then held while the rod is under a steady pull. Because that setting decides how soon the brakes take hold, adjust the wheel brakes first and set the rod afterwards, then make sure the rod is wound far enough into the nut before locking it. Check the thread for damage when the linkage is dismantled.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095835103574,"sku":"1339000","price":5.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1339000.jpg?v=1788815915"},{"product_id":"nut-m10-long-for-trailer-brake-rod-l-50-1339002","title":"Nut M10 long for trailer brake rod L=50","description":"\u003cul\u003e\n\u003cli\u003eLong nut with an M10 thread for a trailer brake rod\u003c\/li\u003e\n\u003cli\u003eLength 50 mm, fully threaded\u003c\/li\u003e\n\u003cli\u003eThe same nut in M8 is article 1339000\u003c\/li\u003e\n\u003cli\u003eCheck the thread on your brake rod before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eNut M10 long for trailer brake rod\u003c\/h2\u003e\n\u003cp\u003eLong nut with an M10 thread for a trailer brake rod, 50 mm long and fully threaded, so the thread runs through the whole nut. The M8 version of the same length is article 1339000.\u003c\/p\u003e\n\u003ch3\u003eLong nuts on a brake rod\u003c\/h3\u003e\n\u003cp\u003eThe extra length of a long nut gives more thread engagement than a standard nut, which is what lets the length of a brake rod joint be set and then held while the rod is under a steady pull. Because that setting decides how soon the brakes take hold, adjust the wheel brakes first and set the rod afterwards, then make sure the rod is wound far enough into the nut before locking it. Check the thread for damage when the linkage is dismantled.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095835529558,"sku":"1339002","price":7.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1339002.jpg?v=1788815914"},{"product_id":"equalizing-yoke-knott-for-wire-with-crimped-dome-ball-nut-bogie-1469000","title":"Equalizing yoke Knott for wire with crimped dome\/ball nut, Bogie","description":"\u003cul\u003e\n\u003cli\u003eEqualizing yoke for brake wire with a crimped dome or ball nut\u003c\/li\u003e\n\u003cli\u003eFor bogie installations\u003c\/li\u003e\n\u003cli\u003eFits Knott\u003c\/li\u003e\n\u003cli\u003eOriginal number 009000582\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eEqualizing yoke Knott for wire, bogie\u003c\/h2\u003e\n\u003cp\u003eEqualizing yoke for brake wire with a crimped dome or ball nut, for bogie installations. It fits Knott. Original number 009000582.\u003c\/p\u003e\n\u003ch3\u003eWhat the equalizing yoke does\u003c\/h3\u003e\n\u003cp\u003eThe yoke sits between the pull coming from the coupling and the wires that run out to the wheel brakes, and it pivots so that pull is divided between them instead of loading one brake harder than the other. That makes it a useful check after adjusting the brakes: with the brakes set evenly the yoke stands square to the direction of pull, and a yoke sitting skewed points back at the adjustment rather than at the yoke. Check that it pivots freely and that the seats and pins are not worn.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/installation-video-for-knott-brakes\"\u003eSee our installation film for Knott brakes\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095869444438,"sku":"1469000","price":42.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469000.jpg?v=1788816018"},{"product_id":"equalizing-yoke-for-wire-with-ball-nut-1469002","title":"Equalizing yoke for wire with ball nut","description":"\u003cul\u003e\n\u003cli\u003eEqualizing yoke for brake wire fitted with a ball nut\u003c\/li\u003e\n\u003cli\u003eOriginal number 009000575\u003c\/li\u003e\n\u003cli\u003eCheck the wire end and the yoke seat against your own installation before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eEqualizing yoke for wire with ball nut\u003c\/h2\u003e\n\u003cp\u003eEqualizing yoke for brake wire fitted with a ball nut, which is the end the wire seats into the yoke with. Original number 009000575.\u003c\/p\u003e\n\u003ch3\u003eWhat the equalizing yoke does\u003c\/h3\u003e\n\u003cp\u003eThe yoke sits between the pull coming from the coupling and the wires that run out to the wheel brakes, and it pivots so that pull is divided between them instead of loading one brake harder than the other. That makes it a useful check after adjusting the brakes: with the brakes set evenly the yoke stands square to the direction of pull, and a yoke sitting skewed points back at the adjustment rather than at the yoke. Check that it pivots freely and that the seats and pins are not worn.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095871508822,"sku":"1469002","price":27.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469002.jpg?v=1788816018"},{"product_id":"equalizing-yoke-u-profile-for-wire-with-crimped-dome-ball-nut-1469003","title":"Equalizing yoke U-profile for wire with crimped dome\/ball nut","description":"\u003cul\u003e\n\u003cli\u003eEqualizing yoke in U-profile, for wire with a crimped dome or ball nut\u003c\/li\u003e\n\u003cli\u003eOriginal number 2385760002\u003c\/li\u003e\n\u003cli\u003eThree of these are included in the tandem brake rod kit 1469014\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eEqualizing yoke U-profile for trailer brake wire\u003c\/h2\u003e\n\u003cp\u003eEqualizing yoke in U-profile, for wire with a crimped dome or ball nut. Original number 2385760002. The same article is used in the tandem brake rod kit 1469014, which contains three of them.\u003c\/p\u003e\n\u003ch3\u003eWhat the equalizing yoke does\u003c\/h3\u003e\n\u003cp\u003eThe yoke sits between the pull coming from the coupling and the wires that run out to the wheel brakes, and it pivots so that pull is divided between them instead of loading one brake harder than the other. That makes it a useful check after adjusting the brakes: with the brakes set evenly the yoke stands square to the direction of pull, and a yoke sitting skewed points back at the adjustment rather than at the yoke. Check that it pivots freely and that the seats and pins are not worn.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095871639894,"sku":"1469003","price":23.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469003.jpg?v=1788816018"},{"product_id":"fork-head-m10-72-mm-cc-60-1469004","title":"Fork head M10, 72 mm CC=60","description":"\u003cul\u003e\n\u003cli\u003eFork head with an M10 thread, given as 72 mm with CC=60\u003c\/li\u003e\n\u003cli\u003eManufactured by BPW and fits BPW\u003c\/li\u003e\n\u003cli\u003eBrake ID ZAF 1,0-2\u003c\/li\u003e\n\u003cli\u003eOriginal number 02.1201.02.12\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eFork head M10 for trailer, BPW\u003c\/h2\u003e\n\u003cp\u003eFork head with an M10 thread, listed as 72 mm with a centre distance of 60. It is manufactured by BPW and fits BPW, with brake ID ZAF 1,0-2 and original number 02.1201.02.12.\u003c\/p\u003e\n\u003ch3\u003eFork heads in the brake linkage\u003c\/h3\u003e\n\u003cp\u003eA fork head is wound onto a threaded rod and takes a pin through its two ears, which is what lets the linkage pivot as the overrun coupling works in and out. Because it screws onto the rod, how far it is wound on also sets the working length of the linkage, so it is locked once the brakes are adjusted. Check the pin and the holes it passes through for wear, since play there shows up as lost travel before the brakes take hold.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BPW","offers":[{"title":"Default Title","offer_id":54095871803734,"sku":"1469004","price":7.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469004.jpg?v=1788816018"},{"product_id":"equalizing-yoke-al-ko-for-wire-with-crimped-dome-ball-nut-bogie-1469008","title":"Equalizing yoke AL-KO for wire with crimped dome\/ball nut, Bogie","description":"\u003cul\u003e\n\u003cli\u003eEqualizing yoke for brake wire with a crimped dome or ball nut\u003c\/li\u003e\n\u003cli\u003eFor bogie installations\u003c\/li\u003e\n\u003cli\u003eFits AL-KO\u003c\/li\u003e\n\u003cli\u003eOriginal number 2088890003\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eEqualizing yoke AL-KO for wire, bogie\u003c\/h2\u003e\n\u003cp\u003eEqualizing yoke for brake wire with a crimped dome or ball nut, for bogie installations. It fits AL-KO. Original number 2088890003.\u003c\/p\u003e\n\u003ch3\u003eWhat the equalizing yoke does\u003c\/h3\u003e\n\u003cp\u003eThe yoke sits between the pull coming from the coupling and the wires that run out to the wheel brakes, and it pivots so that pull is divided between them instead of loading one brake harder than the other. That makes it a useful check after adjusting the brakes: with the brakes set evenly the yoke stands square to the direction of pull, and a yoke sitting skewed points back at the adjustment rather than at the yoke. Check that it pivots freely and that the seats and pins are not worn.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/installation-video-for-al-ko-brakes\"\u003eSee our installation film for AL-KO brakes\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095872065878,"sku":"1469008","price":35.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469008.jpg?v=1788816026"},{"product_id":"equalizing-yoke-for-wire-bpw-knott-bogie-m8-1469012","title":"Equalizing yoke for wire BPW\/Knott Bogie M8","description":"\u003cul\u003e\n\u003cli\u003eEqualizing yoke for brake wire, M8\u003c\/li\u003e\n\u003cli\u003eFor bogie installations\u003c\/li\u003e\n\u003cli\u003eFits BPW and Knott\u003c\/li\u003e\n\u003cli\u003eOriginal number 009000580\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eEqualizing yoke M8 for wire, BPW and Knott bogie\u003c\/h2\u003e\n\u003cp\u003eEqualizing yoke for brake wire with an M8 thread, for bogie installations. It fits BPW and Knott. Original number 009000580.\u003c\/p\u003e\n\u003ch3\u003eWhat the equalizing yoke does\u003c\/h3\u003e\n\u003cp\u003eThe yoke sits between the pull coming from the coupling and the wires that run out to the wheel brakes, and it pivots so that pull is divided between them instead of loading one brake harder than the other. That makes it a useful check after adjusting the brakes: with the brakes set evenly the yoke stands square to the direction of pull, and a yoke sitting skewed points back at the adjustment rather than at the yoke. Check that it pivots freely and that the seats and pins are not worn.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095872164182,"sku":"1469012","price":45.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469012.jpg?v=1788816018"},{"product_id":"trailer-brake-rod-with-equalizing-yoke-m10-2m-2x1-m-1469013","title":"Trailer brake rod with Equalizing yoke M10, 2m (2x1 m)","description":"\u003cdiv\u003eWhat is included\u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003e4060010 Brake rod 2m (2x1m) M10\u003c\/div\u003e\u003cdiv\u003e4020146 1 x M10 Turnbuckle M10 High\/We threaded\u003c\/div\u003e\u003cdiv\u003e1469003 1 levelling yoke U-profile\u003c\/div\u003e\u003cdiv\u003e6468001 2 pcs Nut M10 right\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095872360790,"sku":"1469013","price":35.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469013.jpg?v=1788816018"},{"product_id":"trailer-brake-rod-with-equalizing-yoke-m10-tandem-1469014","title":"Trailer brake rod with Equalizing yoke M10 tandem","description":"\u003cdiv\u003eThe item consists of \u003c\/div\u003e\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\u003cdiv\u003e4020146 x 1 \u003c\/div\u003e\u003cdiv\u003e1469003 x 3 \u003c\/div\u003e\u003cdiv\u003e6468001 x 2 \u003c\/div\u003e\u003cdiv\u003e4010037 x 2 \u003c\/div\u003e\u003cdiv\u003e4060008 x 1 \u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095872491862,"sku":"1469014","price":56.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469014.jpg?v=1788816019"},{"product_id":"brake-cable-bracket-25x3cm-1469016","title":"Brake Cable Bracket 25x3cm","description":"\u003cul\u003e\n\u003cli\u003eBracket for a trailer brake cable\u003c\/li\u003e\n\u003cli\u003eSize 25x3 cm\u003c\/li\u003e\n\u003cli\u003eOriginal number 2088890003\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake cable bracket 25x3 cm for trailer\u003c\/h2\u003e\n\u003cp\u003eBracket for a brake cable, 25x3 cm. Original number 2088890003.\u003c\/p\u003e\n\u003ch3\u003eRouting the brake cable on a trailer\u003c\/h3\u003e\n\u003cp\u003eA bracket holds the brake cable on a fixed path along the frame so it is not left hanging or rubbing against something that moves, and so the cable enters the brake in a straight pull rather than around a bend. A cable that is allowed to move about wears at whatever it touches and the play shows up as a soft brake. Check that the cable runs freely in the bracket and that the fixing has not worked loose.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095872622934,"sku":"1469016","price":27.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1469016.jpg?v=1788816026"},{"product_id":"ball-nut-long-m10-l-35-conical-1470000","title":"Ball nut long M10 L=35 conical","description":"\u003cul\u003e\n\u003cli\u003eTapered at one end — the version without the taper is article 1470105\u003c\/li\u003e\n\u003cli\u003eLong ball nut with an M10 thread, 35 mm long\u003c\/li\u003e\n\u003cli\u003eCheck thread and length against the part you are fitting it to\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBall nut long M10 L=35 conical for trailer\u003c\/h2\u003e\n\u003cp\u003eLong ball nut with an M10 thread and a length of 35 mm, tapered at one end. The taper is what separates it from article 1470105, which carries the same thread and the same length, so choose the one that matches the seat in the part you are fitting it into.\u003c\/p\u003e\n\u003ch3\u003eBall nuts on trailer brake linkage\u003c\/h3\u003e\n\u003cp\u003eA long ball nut is wound onto a threaded rod or wire end and forms the rounded head that the next part of the linkage seats against, so the pull is passed on without the joint binding as it pivots. How far the nut is wound on also sets the working length of the linkage, which is why it is set after the wheel brakes are adjusted and then locked. Inspect the thread for damage whenever the linkage is dismantled.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095874589014,"sku":"1470000","price":11.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1470000.jpg?v=1788816026"},{"product_id":"ball-nut-long-m10-l-35-1470105","title":"Ball nut long M10 L=35","description":"\u003cul\u003e\n\u003cli\u003eLong ball nut with an M10 thread, 35 mm long\u003c\/li\u003e\n\u003cli\u003ePartially threaded\u003c\/li\u003e\n\u003cli\u003eThe version tapered at one end is article 1470000\u003c\/li\u003e\n\u003cli\u003eCheck thread and length against the part you are fitting it to\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBall nut long M10 L=35 for trailer\u003c\/h2\u003e\n\u003cp\u003eLong ball nut with an M10 thread and a length of 35 mm. It is partially threaded, so the thread does not run through the whole length of the nut. The version that is tapered at one end has the same thread and length and is listed separately as article 1470000.\u003c\/p\u003e\n\u003ch3\u003eBall nuts on trailer brake linkage\u003c\/h3\u003e\n\u003cp\u003eA long ball nut is wound onto a threaded rod or wire end and forms the rounded head that the next part of the linkage seats against, so the pull is passed on without the joint binding as it pivots. How far the nut is wound on also sets the working length of the linkage, which is why it is set after the wheel brakes are adjusted and then locked. Inspect the thread for damage whenever the linkage is dismantled.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095875047766,"sku":"1470105","price":3.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/1470105.jpg?v=1788816026"},{"product_id":"friction-lining-alko-aks-3004-2010002","title":"Friction Lining ALKO AKS 3004","description":"\u003cul\u003e\n\u003cli\u003eFriction Lining AL-KO AKS 3004\u003c\/li\u003e\n\u003cli\u003eFits: AKS 3004\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eFriction Lining ALKO AKS 3004 for trailer\u003c\/h2\u003e\n\u003cp\u003eFriction Lining ALKO AKS 3004 is designed to apply pressure on the towing ball and suppress minor movements for a smoother towing experience.\u003c\/p\u003e\n\u003ch3\u003eFriction Lining ALKO AKS 3004 — Confident braking with a loaded trailer\u003c\/h3\u003e\n\u003cp\u003eWhen you're towing a loaded trailer down the highway, even the smallest vibrations can affect your vehicle's handling and fuel efficiency. This friction lining eliminates ball chatter and micro-movements, giving you a noticeably smoother ride and greater confidence behind the wheel. You'll experience reduced stress on your tow vehicle and trailer, meaning safer journeys and longer-lasting equipment.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AL-KO","offers":[{"title":"Default Title","offer_id":54095890678102,"sku":"2010002","price":123.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2010002.jpg?v=1788816049"},{"product_id":"brake-operating-lever-al-ko-100sv-161sv-251sv-2030003","title":"Brake operating lever AL-KO 100SV\/161SV\/251SV","description":"\u003cul\u003e\n\u003cli\u003eBrake operating lever for AL-KO 100SV, 161SV and 251SV\u003c\/li\u003e\n\u003cli\u003eBrake ID T026PS\u003c\/li\u003e\n\u003cli\u003eOriginal number 354601\u003c\/li\u003e\n\u003cli\u003eFits AL-KO\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake operating lever AL-KO 100SV, 161SV and 251SV for trailer\u003c\/h2\u003e\n\u003cp\u003eBrake operating lever listed for AL-KO 100SV, 161SV and 251SV, under brake ID T026PS. The original number is 354601. One article covers the three SV designations, but it is still worth reading the designation on your own unit before ordering.\u003c\/p\u003e\n\u003ch3\u003eMatching a brake operating lever\u003c\/h3\u003e\n\u003cp\u003eA brake operating lever is listed against the make and the exact model designation of the brake, and any version suffix is part of that designation - Ausf. A and Ausf. C are not the same part. Read the designation on the unit you are replacing, and use the original number where one is given to confirm you have the right lever. Look the lever over for wear and play while it is off.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/installation-video-for-al-ko-brakes\"\u003eSee our installation film for AL-KO brakes\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095890907478,"sku":"2030003","price":99.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2030003.jpg?v=1788816049"},{"product_id":"brake-operating-lever-bpw-zaf-1-6-3-2-0-3-3-0-3-2030007","title":"Brake operating lever BPW ZAF 1,6-3\/\/2,0-3\/\/3,0-3","description":"\u003cul\u003e\n\u003cli\u003eBrake operating lever for BPW ZAF 1,6-3, 2,0-3 and 3,0-3\u003c\/li\u003e\n\u003cli\u003eBrake ID ZAF 1,6-3\u003c\/li\u003e\n\u003cli\u003eMade by BPW, fits BPW\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake operating lever BPW ZAF 1,6-3, 2,0-3 and 3,0-3 for trailer\u003c\/h2\u003e\n\u003cp\u003eBrake operating lever made by BPW, listed for BPW ZAF 1,6-3, 2,0-3 and 3,0-3. The brake ID given for the article is ZAF 1,6-3. No original number is listed for this lever, so match it on the ZAF designation found on your own unit.\u003c\/p\u003e\n\u003ch3\u003eMatching a brake operating lever\u003c\/h3\u003e\n\u003cp\u003eA brake operating lever is listed against the make and the exact model designation of the brake, and any version suffix is part of that designation - Ausf. A and Ausf. C are not the same part. Read the designation on the unit you are replacing, and use the original number where one is given to confirm you have the right lever. Look the lever over for wear and play while it is off.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BPW","offers":[{"title":"Default Title","offer_id":54095891071318,"sku":"2030007","price":101.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2030007.jpg?v=1788816048"},{"product_id":"brake-operating-lever-al-ko-60s-2-90s-3-131r-161r-251s-1993-90-27-3846-2030009","title":"Brake operating lever AL-KO 60S\/2 90S\/3 131R 161R 251S; 1993-; 90:27; 384655","description":"\u003cul\u003e\n\u003cli\u003eBrake operating lever for AL-KO 60S\/2, 90S\/3, 131R, 161R and 251S, 1993-\u003c\/li\u003e\n\u003cli\u003eBrake ID 131 R\u003c\/li\u003e\n\u003cli\u003eOriginal number 380265\u003c\/li\u003e\n\u003cli\u003eMade by AL-KO, fits AL-KO\u003c\/li\u003e\n\u003cli\u003eListed in full as: AL-KO 60S\/2 90S\/3 131R 161R 251S; 1993-; 90:27; 384655\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake operating lever AL-KO 60S\/2, 90S\/3, 131R, 161R, 251S for trailer\u003c\/h2\u003e\n\u003cp\u003eBrake operating lever made by AL-KO, covering AL-KO 60S\/2, 90S\/3, 131R, 161R and 251S, 1993-. Brake ID 131 R and original number 380265 are both given, so the lever can be cross-checked against the part being replaced.\u003c\/p\u003e\n\u003ch3\u003eMatching a brake operating lever\u003c\/h3\u003e\n\u003cp\u003eA brake operating lever is listed against the make and the exact model designation of the brake, and any version suffix is part of that designation - Ausf. A and Ausf. C are not the same part. Read the designation on the unit you are replacing, and use the original number where one is given to confirm you have the right lever. Look the lever over for wear and play while it is off.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/installation-video-for-al-ko-brakes\"\u003eSee our installation film for AL-KO brakes\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AL-KO","offers":[{"title":"Default Title","offer_id":54095891202390,"sku":"2030009","price":113.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2030009.jpg?v=1788816049"},{"product_id":"brake-operating-lever-al-ko-251g-ausf-c-2030012","title":"Brake operating lever AL-KO 251G Ausf. C","description":"\u003cul\u003e\n\u003cli\u003eBrake operating lever for AL-KO 251G Ausf. C\u003c\/li\u003e\n\u003cli\u003eFits AL-KO\u003c\/li\u003e\n\u003cli\u003eThe version suffix Ausf. C is part of the designation - check it against your own unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake operating lever AL-KO 251G Ausf. C for trailer\u003c\/h2\u003e\n\u003cp\u003eBrake operating lever listed for AL-KO 251G in version Ausf. C. No original number is given for this article, so the designation on your own unit is what to match.\u003c\/p\u003e\n\u003ch3\u003eMatching a brake operating lever\u003c\/h3\u003e\n\u003cp\u003eA brake operating lever is listed against the make and the exact model designation of the brake, and any version suffix is part of that designation - Ausf. A and Ausf. C are not the same part. Read the designation on the unit you are replacing, and use the original number where one is given to confirm you have the right lever. Look the lever over for wear and play while it is off.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/installation-video-for-al-ko-brakes\"\u003eSee our installation film for AL-KO brakes\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095891366230,"sku":"2030012","price":187.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2030012.jpg?v=1788816049"},{"product_id":"brake-operating-lever-al-ko-2-8-vb-1-ausf-c-2030013","title":"Brake operating lever AL-KO 2,8 VB\/1 Ausf. C","description":"\u003cul\u003e\n\u003cli\u003eBrake operating lever for AL-KO 2,8 VB\/1 Ausf. C\u003c\/li\u003e\n\u003cli\u003eFits AL-KO\u003c\/li\u003e\n\u003cli\u003eThe gas spring listed for the handbrake lever on the same AL-KO 2,8 VB\/1 Ausf. C is article 2210011\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake operating lever AL-KO 2,8 VB\/1 Ausf. C for trailer\u003c\/h2\u003e\n\u003cp\u003eBrake operating lever listed for AL-KO 2,8 VB\/1 in version Ausf. C. No original number is given for this article, so the designation on your own unit is what to match. The gas spring listed for the handbrake lever on the same AL-KO 2,8 VB\/1 Ausf. C is article 2210011.\u003c\/p\u003e\n\u003ch3\u003eMatching a brake operating lever\u003c\/h3\u003e\n\u003cp\u003eA brake operating lever is listed against the make and the exact model designation of the brake, and any version suffix is part of that designation - Ausf. A and Ausf. C are not the same part. Read the designation on the unit you are replacing, and use the original number where one is given to confirm you have the right lever. Look the lever over for wear and play while it is off.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/installation-video-for-al-ko-brakes\"\u003eSee our installation film for AL-KO brakes\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095891497302,"sku":"2030013","price":417.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2030013.jpg?v=1788816056"},{"product_id":"brake-operating-lever-al-ko-161-s-ausf-a-2030014","title":"Brake operating lever AL-KO 161 S Ausf. A","description":"\u003cul\u003e\n\u003cli\u003eBrake operating lever for AL-KO 161 S Ausf. A\u003c\/li\u003e\n\u003cli\u003eFits AL-KO\u003c\/li\u003e\n\u003cli\u003eThe version suffix Ausf. A is part of the designation - check it against your own unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake operating lever AL-KO 161 S Ausf. A for trailer\u003c\/h2\u003e\n\u003cp\u003eBrake operating lever listed for AL-KO 161 S in version Ausf. A. No original number is given for this article, so the model designation on your own unit is what to go by.\u003c\/p\u003e\n\u003ch3\u003eMatching a brake operating lever\u003c\/h3\u003e\n\u003cp\u003eA brake operating lever is listed against the make and the exact model designation of the brake, and any version suffix is part of that designation - Ausf. A and Ausf. C are not the same part. Read the designation on the unit you are replacing, and use the original number where one is given to confirm you have the right lever. Look the lever over for wear and play while it is off.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/installation-video-for-al-ko-brakes\"\u003eSee our installation film for AL-KO brakes\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095891628374,"sku":"2030014","price":154.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2030014.jpg?v=1788816056"},{"product_id":"brake-operating-lever-knott-version-kh-gf-2035001","title":"Brake operating lever Knott version KH + GF","description":"\u003cul\u003e\n\u003cli\u003eBrake operating lever for Knott, version KH + GF\u003c\/li\u003e\n\u003cli\u003eFits Knott and Avonride\u003c\/li\u003e\n\u003cli\u003eBrake ID 21.2.4.1.0.0121\u003c\/li\u003e\n\u003cli\u003eOriginal number 05.190.31.71.0\u003c\/li\u003e\n\u003cli\u003eMade by Avonride\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake operating lever Knott version KH + GF for trailer\u003c\/h2\u003e\n\u003cp\u003eBrake operating lever for Knott in version KH + GF. It is listed as fitting both Knott and Avonride, and is made by Avonride. Brake ID 21.2.4.1.0.0121, original number 05.190.31.71.0 - both worth checking against the part being replaced, since the version letters are what separate one lever from another.\u003c\/p\u003e\n\u003ch3\u003eMatching a brake operating lever\u003c\/h3\u003e\n\u003cp\u003eA brake operating lever is listed against the make and the exact model designation of the brake, and any version suffix is part of that designation - Ausf. A and Ausf. C are not the same part. Read the designation on the unit you are replacing, and use the original number where one is given to confirm you have the right lever. Look the lever over for wear and play while it is off.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/installation-video-for-knott-brakes\"\u003eSee our installation film for Knott brakes\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AVONRIDE","offers":[{"title":"Default Title","offer_id":54095891759446,"sku":"2035001","price":77.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2035001.jpg?v=1788816049"},{"product_id":"brake-operating-lever-knott-kfl12-2035002","title":"Brake operating lever Knott KFL12","description":"\u003cul\u003e\n\u003cli\u003eBrake operating lever for Knott KFL 12\u003c\/li\u003e\n\u003cli\u003eBrake ID KFL 12\u003c\/li\u003e\n\u003cli\u003eOriginal number 203603.001\u003c\/li\u003e\n\u003cli\u003eMade by Knott, fits Knott\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake operating lever Knott KFL 12 for trailer\u003c\/h2\u003e\n\u003cp\u003eBrake operating lever for Knott, listed under brake ID KFL 12. Made by Knott, original number 203603.001. Use the brake ID and the original number to confirm the lever against the one you are replacing.\u003c\/p\u003e\n\u003ch3\u003eMatching a brake operating lever\u003c\/h3\u003e\n\u003cp\u003eA brake operating lever is listed against the make and the exact model designation of the brake, and any version suffix is part of that designation - Ausf. A and Ausf. C are not the same part. Read the designation on the unit you are replacing, and use the original number where one is given to confirm you have the right lever. Look the lever over for wear and play while it is off.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003ca href=\"\/pages\/installation-video-for-knott-brakes\"\u003eSee our installation film for Knott brakes\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"KNOTT","offers":[{"title":"Default Title","offer_id":54095891857750,"sku":"2035002","price":62.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2035002.jpg?v=1788816056"},{"product_id":"trailer-brake-rod-right-left-500-mm-m10-2048001","title":"Trailer brake rod Right\/Left 500 mm M10","description":"\u003cul\u003e\n\u003cli\u003eTrailer brake rod, 500 mm total length, M10 thread\u003c\/li\u003e\n\u003cli\u003eThe same rod is listed for the right and the left side\u003c\/li\u003e\n\u003cli\u003eSupplied without nuts\u003c\/li\u003e\n\u003cli\u003eBrake rod holders are listed as separate articles: 2049002 front and 2049001 rear\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake rod 500 mm M10 for trailer\u003c\/h2\u003e\n\u003cp\u003eTrailer brake rod with a total length of 500 mm and M10 thread, listed for both the right and the left side. It is supplied without nuts, so order those separately if the old ones are not being reused. Brake rod holders are listed as their own articles, 2049002 for the front position and 2049001 for the rear.\u003c\/p\u003e\n\u003ch3\u003eThe brake rod in the linkage\u003c\/h3\u003e\n\u003cp\u003eThe brake rod is a threaded rod in the trailer's brake linkage, so both the length and the thread have to match what is already fitted - a rod of the wrong length cannot be made up correctly by adjustment alone. Check the thread over its full length and make sure the rod is straight before putting it back into service.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095892021590,"sku":"2048001","price":31.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2048001.jpg?v=1788816049"},{"product_id":"trailer-brake-rod-holder-rear-2049001","title":"Trailer brake rod holder rear","description":"\u003cul\u003e\n\u003cli\u003eHolder for the trailer brake rod, rear position\u003c\/li\u003e\n\u003cli\u003eOriginal number 228827\u003c\/li\u003e\n\u003cli\u003eThe holder for the front position is article 2049002\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake rod holder rear for trailer\u003c\/h2\u003e\n\u003cp\u003eHolder for the trailer brake rod, for the rear position. Original number 228827. The holder for the front position is a separate part and is listed as article 2049002.\u003c\/p\u003e\n\u003ch3\u003eSupporting the brake rod\u003c\/h3\u003e\n\u003cp\u003eThe holder supports the brake rod along its run, so the rod stays in position instead of moving where it is not meant to. The front and the rear holder are separate parts, so check which position is worn before ordering, and look the rod over while the holder is off.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095892316502,"sku":"2049001","price":11.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2049001.jpg?v=1788816056"},{"product_id":"trailer-brake-rod-holder-front-2049002","title":"Trailer brake rod holder front","description":"\u003cul\u003e\n\u003cli\u003eHolder for the trailer brake rod, front position\u003c\/li\u003e\n\u003cli\u003eOriginal number 2289860007\u003c\/li\u003e\n\u003cli\u003eThe holder for the rear position is article 2049001\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eBrake rod holder front for trailer\u003c\/h2\u003e\n\u003cp\u003eHolder for the trailer brake rod, for the front position. Original number 2289860007. The holder for the rear position is a separate part and is listed as article 2049001.\u003c\/p\u003e\n\u003ch3\u003eSupporting the brake rod\u003c\/h3\u003e\n\u003cp\u003eThe holder supports the brake rod along its run, so the rod stays in position instead of moving where it is not meant to. The front and the rear holder are separate parts, so check which position is worn before ordering, and look the rod over while the holder is off.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095892676950,"sku":"2049002","price":5.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2049002.jpg?v=1788816055"},{"product_id":"overrun-device-bush-kit-alko-30s-60s-90s-from-1996-2070001","title":"Overrun device bush kit ALKO 30S\/60S\/90S from 1996","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush kit for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with AL-KO\u003c\/li\u003e\n\u003cli\u003eModels: 30S, 60S\/2 and 90S\/3 (from 1996)\u003c\/li\u003e\n\u003cli\u003eDimensions: inner 35 mm, outer 42.5 mm, length 40 mm\u003c\/li\u003e\n\u003cli\u003eInstallation may require reaming\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush kit ALKO 30S\/60S\/90S for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush kit is used when replacing bushes in the trailer overrun brake mechanism. The kit is intended for ALKO overrun devices of models 30S, 60S\/2 and 90S\/3 from 1996.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush kit for reliable operation\u003c\/h3\u003e\n\u003cp\u003eReplacing worn bushes reduces play and ensures smoother movement in the overrun mechanism, providing safe and stable operation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AL-KO","offers":[{"title":"Default Title","offer_id":54095893070166,"sku":"2070001","price":28.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2070001.jpg?v=1788816056"},{"product_id":"overrun-device-bush-alko-160s-sv-sr-1-2070004","title":"Overrun device bush ALKO 160S\/SV\/SR\/1","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with AL-KO\u003c\/li\u003e\n\u003cli\u003eModels: 160S, 160SV and 160SR\/1\u003c\/li\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eDimensions: 37.5 x 44.5 x 40.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush ALKO 160S\/SV\/SR\/1 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush is used in the trailer overrun mechanism and is intended for ALKO model 160S, 160SV and 160SR\/1 where correct fit is important for stable operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA correctly functioning bush reduces play and enables smoother movement in the overrun mechanism, providing safe and stable use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095893496150,"sku":"2070004","price":117.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2070004.jpg?v=1788816056"},{"product_id":"overrun-device-bush-alko-200s-2-0vb-101vb-front-2070005","title":"Overrun device bush ALKO 200S\/2.0VB\/101VB front","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with AL-KO\u003c\/li\u003e\n\u003cli\u003eModels: 200S, 2.0VB (up to 1989), 101VB\u003c\/li\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eDimensions: 40.2 x 52.2 x 51 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush ALKO 200S\/2.0VB\/101VB for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush is used as the front bush in the trailer overrun mechanism and is intended for ALKO models 200S, 2.0VB and 101VB.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA correctly fitted bush supports smooth movement and consistent braking performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AL-KO","offers":[{"title":"Default Title","offer_id":54095893954902,"sku":"2070005","price":33.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2070005.jpg?v=1788816056"},{"product_id":"overrun-device-bush-alko-200s-2-0vb-101vb-rear-2070006","title":"Overrun device bush ALKO 200S\/2.0VB\/101VB rear","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with AL-KO\u003c\/li\u003e\n\u003cli\u003eModels: 200S, 2.0VB (until 1989), 101VB\u003c\/li\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eDimensions: 40.2 x 52.2 x 51 mm\u003c\/li\u003e\n\u003cli\u003eReaming may be required during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush ALKO 200S\/2.0VB\/101VB for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush is used in the trailer overrun mechanism and is intended for ALKO models 200S, 2.0VB and 101VB.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA correctly fitted bush supports smooth movement and consistent braking performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AL-KO","offers":[{"title":"Default Title","offer_id":54095894413654,"sku":"2070006","price":28.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2070006.jpg?v=1788816056"},{"product_id":"overrun-device-bush-alko-200sr-front-2070007","title":"Overrun device bush ALKO 200SR front","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with AL-KO\u003c\/li\u003e\n\u003cli\u003eModel: 200SR\u003c\/li\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eDimensions: 44 x 52.4 x 50.8 mm\u003c\/li\u003e\n\u003cli\u003eBroaching may be required during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush ALKO 200SR for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush is used in the trailer overrun mechanism and is intended for ALKO model 200SR.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA correctly fitted bush supports smooth movement and consistent braking performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AL-KO","offers":[{"title":"Default Title","offer_id":54095894806870,"sku":"2070007","price":79.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2070007.jpg?v=1788816056"},{"product_id":"overrun-device-bush-alko-200sr-rear-2070008","title":"Overrun device bush ALKO 200SR rear","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with AL-KO\u003c\/li\u003e\n\u003cli\u003eModel: 200SR\u003c\/li\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eDimensions: 44 x 52.4 x 50.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush ALKO 200SR for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush is used in the trailer overrun mechanism and is intended for ALKO model 200SR.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA correctly fitted bush supports smooth movement and consistent braking performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AL-KO","offers":[{"title":"Default Title","offer_id":54095895200086,"sku":"2070008","price":85.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2070008.jpg?v=1788816056"},{"product_id":"overrun-device-bush-alko-2-8-351-vb-2070009","title":"Overrun device bush ALKO 2.8\/351 VB","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with AL-KO\u003c\/li\u003e\n\u003cli\u003eModels: 2.8 VB and 351 VB\u003c\/li\u003e\n\u003cli\u003ePosition: front and rear\u003c\/li\u003e\n\u003cli\u003eDimensions: 60 x 70.5 x 61.3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush ALKO 2.8\/351 VB for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush is used in the trailer overrun mechanism and is intended for ALKO model 2.8 VB and 351 VB.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA correctly fitted bush supports smooth movement and consistent braking performance in the overrun device.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AL-KO","offers":[{"title":"Default Title","offer_id":54095896740182,"sku":"2070009","price":45.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2070009.jpg?v=1788816056"},{"product_id":"overrun-device-bush-kit-alko-30s-60s-90s-120sr-design-b-before-1992-2070011","title":"Overrun device bush kit ALKO 30S\/60S\/90S\/120SR Design B before 1992","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush kit for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with AL-KO\u003c\/li\u003e\n\u003cli\u003eModels: 30S, 60S\/1\/2, 90S\/1\/2\/3, 120SR design B (before 1992)\u003c\/li\u003e\n\u003cli\u003eDimensions: 35 x 42.5 x 40 mm\u003c\/li\u003e\n\u003cli\u003eReaming may be required during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush kit ALKO 30S\/60S\/90S\/120SR design B 35x42.5x40 before 1992 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush kit is used when replacing bushes in the trailer overrun brake mechanism. The kit is intended for ALKO overrun devices of the older design B used before 1992.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush kit for reliable operation\u003c\/h3\u003e\n\u003cp\u003eReplacing worn bushes reduces play and ensures smoother movement in the overrun mechanism, which provides stable function and reduces wear on adjacent components.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AL-KO","offers":[{"title":"Default Title","offer_id":54095897395542,"sku":"2070011","price":52.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2070011.jpg?v=1788816062"},{"product_id":"overrun-device-bush-bpw-zaf-1-03-0-2070016","title":"Overrun device bush BPW ZAF 1.0–3.0","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with BPW\u003c\/li\u003e\n\u003cli\u003eBroms-ID ZAF 1.0–3.0\u003c\/li\u003e\n\u003cli\u003eDimensions: 40 x 46.5 x 170 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush BPW ZAF 1.0–3.0 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush is used as a replacement part in the trailer overrun mechanism with ZAF design. The bush is intended for BPW overrun devices where correct fit is essential for reliable operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA correctly functioning bush contributes to smooth movement in the overrun device and reduced play, providing safe and stable use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BPW","offers":[{"title":"Default Title","offer_id":54095898902870,"sku":"2070016","price":43.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2070016.jpg?v=1788816062"},{"product_id":"overrun-device-bush-bpw-zaf-3-0-2070017","title":"Overrun device bush BPW ZAF 3.0","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with BPW\u003c\/li\u003e\n\u003cli\u003eBroms-ID ZAF 3.0\u003c\/li\u003e\n\u003cli\u003eDimensions: 62 x 65 x 240 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush BPW ZAF 3.0 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush is used as a replacement part in the trailer overrun mechanism with ZAF design. The bush is intended for BPW overrun devices where correct fit is essential for reliable operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA correctly functioning overrun device bush contributes to smooth movement in the overrun mechanism and reduced play, providing safe and stable use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BPW","offers":[{"title":"Default Title","offer_id":54095899230550,"sku":"2070017","price":71.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2070017.jpg?v=1788816062"},{"product_id":"overrun-device-bush-kit-alko-131-161-251-from-1993-2070201","title":"Overrun device bush kit ALKO 131\/161\/251 from 1993","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush kit for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with AL-KO, Peitz and BPW\u003c\/li\u003e\n\u003cli\u003eBroms-ID 131R; 161S\/VB; 250S\/1; 251S\/VB\/G; 351ZA (from 1993)\u003c\/li\u003e\n\u003cli\u003eDimensions: 49 x 64 x 57\/37 mm\u003c\/li\u003e\n\u003cli\u003eContents: 1 overrun device bush kit front and rear\u003c\/li\u003e\n\u003cli\u003eBroaching may be required during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush kit ALKO 131\/161\/251 49x64x57\/37 from 1993 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush kit is used when replacing front and rear bushes in the trailer overrun mechanism. The kit is intended for ALKO overrun devices from 1993 and is also compatible with equivalent designs from Peitz and BPW.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush kit for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA complete replacement of bushes reduces play and provides smoother movement in the overrun device, ensuring stable operation and reducing wear over time.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AL-KO","offers":[{"title":"Default Title","offer_id":54095899656534,"sku":"2070201","price":33.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2070201.jpg?v=1788816063"},{"product_id":"overrun-device-bush-bpw-peitz-zaf-1-352-0-2072006","title":"Overrun device bush BPW\/Peitz ZAF 1.35–2.0","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with BPW and Peitz\u003c\/li\u003e\n\u003cli\u003eBroms-ID ZAF 1.35–1; 1.6–1; 2.0–1\u003c\/li\u003e\n\u003cli\u003ePosition: front\u003c\/li\u003e\n\u003cli\u003eDimensions: 46 x 62.5 x 65 mm\u003c\/li\u003e\n\u003cli\u003eBroaching may be required during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush BPW\/Peitz ZAF front 46 x 62.5 x 65 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush is used as the front bush in the trailer overrun mechanism. The bush is intended for ZAF versions from BPW and Peitz where correct fit is essential for stable operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA properly functioning front overrun device bush reduces play and supports smooth movement in the overrun device, ensuring safe and stable performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BPW","offers":[{"title":"Default Title","offer_id":54095899853142,"sku":"2072006","price":22.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2072006.jpg?v=1788816063"},{"product_id":"overrun-device-bush-zaf-1-53-0-2072011","title":"Overrun device bush ZAF 1.5–3.0","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with ZAF\u003c\/li\u003e\n\u003cli\u003eBroms-ID 1.5–2; 1.6–3; 2.0–2; 2.0–3\u003c\/li\u003e\n\u003cli\u003eDimensions: 50 x 64–70 x 220 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush ZAF 50x64–70x220 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush is used as a replacement part in the trailer overrun mechanism with ZAF design. The bush is intended for multiple ZAF variants where correct fit is essential for reliable operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA correctly functioning bush supports smooth movement in the overrun device and reduces play, providing safe and stable operation.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BPW","offers":[{"title":"Default Title","offer_id":54095900049750,"sku":"2072011","price":42.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2072011.jpg?v=1788816062"},{"product_id":"overrun-device-bush-kit-bpw-zaf-2-8-1-pav-sr-2-7-2072019","title":"Overrun device bush kit BPW ZAF 2.8-1 PAV\/SR 2.7","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush kit for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with BPW and Peitz\u003c\/li\u003e\n\u003cli\u003eBroms-ID ZAF 2.8-1 and PAV\/SR 2.7\u003c\/li\u003e\n\u003cli\u003eDimensions: 51 x 62.5 x 66\/41 mm\u003c\/li\u003e\n\u003cli\u003eMachining may be required during replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush kit BPW ZAF 2.8-1 PAV\/SR 2.7 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush kit is used when replacing bushings in the trailer overrun brake. The kit is designed for overrun devices from BPW and Peitz where worn bushings can cause play and uneven operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush kit for reliable operation\u003c\/h3\u003e\n\u003cp\u003eReplacing the bushings restores smooth movement in the overrun device and reduces wear on other components, providing more controlled and stable braking performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BPW","offers":[{"title":"Default Title","offer_id":54095900180822,"sku":"2072019","price":57.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2072019.jpg?v=1788816063"},{"product_id":"overrun-device-bush-gsm-2073002","title":"Overrun device bush GSM","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with GSM\u003c\/li\u003e\n\u003cli\u003ePosition: rear\u003c\/li\u003e\n\u003cli\u003eDimensions: 35.5 x 42 x 56 mm\u003c\/li\u003e\n\u003cli\u003eFront bush (2073001) has been discontinued\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush GSM rear 35.5 x 42 x 56 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush is used in the trailer overrun mechanism and is intended for GSM model applications where correct fit is important for stable operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA correctly fitted rear bush supports smooth movement and consistent performance in the overrun device, providing safe and stable use.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Valeryd","offers":[{"title":"Default Title","offer_id":54095900344662,"sku":"2073002","price":11.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2073002.jpg?v=1788816062"},{"product_id":"overrun-device-bush-gta-1-3-1-7-2-1-2075001","title":"Overrun device bush GTA 1.3\/1.7\/2.1","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with GTA\u003c\/li\u003e\n\u003cli\u003eBroms-ID 1.3; 1.7; 2.1\u003c\/li\u003e\n\u003cli\u003eDimensions: 44.5 x 50 x 50 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush GTA 1.3\/1.7\/2.1 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush is used as a replacement part in the trailer overrun mechanism. The bush is intended for GTA overrun devices where correct fit is important for stable and smooth operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA functioning overrun device bush reduces play and enables smoother movement in the overrun mechanism. This delivers more consistent operation and reduces wear on adjacent components.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"KNOTT","offers":[{"title":"Default Title","offer_id":54095900508502,"sku":"2075001","price":39.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2075001.jpg?v=1788816063"},{"product_id":"overrun-device-bush-kit-knott-kf-kr-7-520-until-2008-2075003","title":"Overrun device bush kit Knott KF\/KR 7.5–20 until 2008","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush kit for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with Knott\u003c\/li\u003e\n\u003cli\u003eBroms-ID KF\/KR 7.5–20 (until 2008)\u003c\/li\u003e\n\u003cli\u003eDimensions: 45.7 x 50.4 x 49.4 mm\u003c\/li\u003e\n\u003cli\u003eInstallation may require broaching and drilling holes for grease nipples\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush kit Knott KF\/KR 7.5–20 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush kit is used when replacing bushes in the trailer overrun brake mechanism. The kit is intended for Knott overrun devices where worn bushes can cause play and uneven function.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush kit for reliable operation\u003c\/h3\u003e\n\u003cp\u003eBy replacing bushes in the overrun brake, movement in the overrun device is improved and braking becomes more consistent. Some models may find this bush too large; in such cases use article 2075001.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AVONRIDE","offers":[{"title":"Default Title","offer_id":54095900639574,"sku":"2075003","price":33.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2075003.jpg?v=1788816063"},{"product_id":"overrun-device-bush-kit-knott-kf-kr-krv-2730-50x55-4x59-2075004","title":"Overrun device bush kit Knott KF\/KR\/KRV 27–30 50x55,4x59","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush kit for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with Knott\u003c\/li\u003e\n\u003cli\u003eBroms-ID KF27; KF30; KR27; KR30; KRV30\u003c\/li\u003e\n\u003cli\u003eDimensions: 50 x 55.4 x 59 mm\u003c\/li\u003e\n\u003cli\u003eContents: 2 bushes and 1 damper\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush kit Knott KF\/KR\/KRV 27–30 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush kit is used for service or renovation of the trailer overrun brake. The kit is intended for Knott overrun devices where worn bushes need to be replaced to restore stable and consistent operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush kit for reliable operation\u003c\/h3\u003e\n\u003cp\u003eA complete replacement of bushes and damper reduces play and provides more controlled movement in the overrun device, resulting in smoother braking performance and reduced wear.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"KNOTT","offers":[{"title":"Default Title","offer_id":54095900901718,"sku":"2075004","price":36.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2075004.jpg?v=1788816063"},{"product_id":"overrun-device-bush-kit-knott-kf-kfl-kr-krv-7-520-from-2008-2075007","title":"Overrun device bush kit Knott KF\/KFL\/KR\/KRV 7.5–20 from 2008","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush kit for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with Knott\u003c\/li\u003e\n\u003cli\u003eBroms-ID KF\/KFL\/KR\/KRV 7.5–20 (from 2008)\u003c\/li\u003e\n\u003cli\u003eDimensions: 45 x 50 x 50 mm\u003c\/li\u003e\n\u003cli\u003eBush with snap lock\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush kit Knott KF\/KFL\/KR\/KRV 7.5–20 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush kit is used when replacing bushes in the trailer overrun brake. The kit is intended for Knott overrun devices where worn bushes can cause play and uneven operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush kit for reliable operation\u003c\/h3\u003e\n\u003cp\u003eReplacing the bushes contributes to smoother operation of the overrun device and reduces wear on other components. The snap lock facilitates correct installation and secure positioning of the bush.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AVONRIDE","offers":[{"title":"Default Title","offer_id":54095901032790,"sku":"2075007","price":59.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2075007.jpg?v=1788816063"},{"product_id":"overrun-device-bush-kit-knott-kf-kr-krv-2730-50x55x60-2075008","title":"Overrun device bush kit Knott KF\/KR\/KRV 27–30 50x55x60","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush kit for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with Knott\u003c\/li\u003e\n\u003cli\u003eBroms-ID KF\/KR\/KRV 27–30\u003c\/li\u003e\n\u003cli\u003eDimensions: 50 x 55 x 60 mm\u003c\/li\u003e\n\u003cli\u003eInstallation may require broaching and drilling for grease nipple\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush kit Knott KF\/KR\/KRV 27–30 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush kit is used when replacing bushes in the trailer overrun brake mechanism. The kit is intended for Knott overrun devices where worn bushes can cause play and uneven operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush kit for reliable operation\u003c\/h3\u003e\n\u003cp\u003eReplacing bushes contributes to smoother operation of the overrun device and reduces wear on other components, resulting in more controlled braking performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"KNOTT","offers":[{"title":"Default Title","offer_id":54095902507350,"sku":"2075008","price":39.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2075008.jpg?v=1788816062"},{"product_id":"overrun-device-bush-kit-bpw-peitz-zaf-pav-sr-1-32-0-2077002","title":"Overrun device bush kit BPW\/Peitz ZAF PAV\/SR 1.3–2.0","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush kit for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with BPW\/Peitz\u003c\/li\u003e\n\u003cli\u003eBroms-ID ZAF PAV\/SR 1,3–2,0\u003c\/li\u003e\n\u003cli\u003eDimensions: 46 x 63 x 65\/45 mm\u003c\/li\u003e\n\u003cli\u003eContents: 1 overrun device bush kit front and rear\u003c\/li\u003e\n\u003cli\u003eInner diameter: 49 mm, outer diameter: 64 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush kit BPW\/Peitz ZAF PAV\/SR 1,3–2,0 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush kit is used when replacing front and rear bushes in the trailer overrun mechanism. The kit is intended for BPW and Peitz overrun devices where worn bushes can cause play and uneven operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush kit for reliable operation\u003c\/h3\u003e\n\u003cp\u003eReplacing worn bushes restores smooth movement in the overrun device and reduces wear on other components, providing more controlled and stable braking performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BPW","offers":[{"title":"Default Title","offer_id":54095902703958,"sku":"2077002","price":18.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2077002.jpg?v=1788816062"},{"product_id":"overrun-device-bush-kit-schlegl-sfv-1020-2078005","title":"Overrun device bush kit Schlegl SFV 10–20","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush kit for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with Schlegl\u003c\/li\u003e\n\u003cli\u003eBroms-ID SFV 10–20\u003c\/li\u003e\n\u003cli\u003eDimensions: 45 x 51.5 x 50 mm\u003c\/li\u003e\n\u003cli\u003eDisassembly may be required during installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush kit Schlegl SFV 10–20 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush kit is used when replacing bushings in the trailer overrun brake mechanism. The kit is intended for Schlegl overrun devices where worn bushings can cause play and uneven operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush kit for reliable operation\u003c\/h3\u003e\n\u003cp\u003eReplacement of bushings contributes to smoother movement in the overrun device and reduced wear on other components, providing more controlled braking performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"SCHLEGL","offers":[{"title":"Default Title","offer_id":54095902867798,"sku":"2078005","price":44.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2078005.jpg?v=1788816070"},{"product_id":"overrun-device-bush-kit-westfalia-wae-12002000-2078007","title":"Overrun device bush kit Westfalia WAE 1200–2000","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush kit for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with Westfalia\u003c\/li\u003e\n\u003cli\u003eBroms-ID WAE 1200–2000\u003c\/li\u003e\n\u003cli\u003eDimensions: 50 x 62 x 50 mm\u003c\/li\u003e\n\u003cli\u003eInstallation may require reaming\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush kit Westfalia WAE 1200–2000 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush kit is used when replacing bushes in the trailer overrun brake mechanism. The kit is intended for Westfalia overrun devices where worn bushes can cause play and uneven operation.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush kit for reliable operation\u003c\/h3\u003e\n\u003cp\u003eReplacing the bushes contributes to smoother movement in the overrun device and reduced wear on other components, providing more controlled braking performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WESTFALIA","offers":[{"title":"Default Title","offer_id":54095903064406,"sku":"2078007","price":56.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2078007.jpg?v=1788816069"},{"product_id":"overrun-device-bush-kit-hahn-gsa-gsar-1-02-7-2078011","title":"Overrun device bush kit Hahn GSA\/GSAR 1.0–2.7","description":"\u003cul\u003e\n\u003cli\u003eOverrun device bush kit for trailer\u003c\/li\u003e\n\u003cli\u003eCompatible with BPW, Grau and Hahn\u003c\/li\u003e\n\u003cli\u003eBroms-ID GSA\/GSAR 1.0–2.7\u003c\/li\u003e\n\u003cli\u003eDimensions: 50.5 x 55 x 59\/50 mm\u003c\/li\u003e\n\u003cli\u003eContents: 1 overrun device bush kit front and rear\u003c\/li\u003e\n\u003cli\u003eDuring replacement, reaming may be required\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eOverrun device bush kit Hahn GSA\/GSAR 1.0–2.7 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis overrun device bush kit is used when replacing front and rear bushes in the trailer overrun mechanism. The kit is intended for Hahn overrun devices and is also compatible with equivalent solutions from BPW and Grau.\u003c\/p\u003e\n\u003ch3\u003eOverrun device bush kit for reliable operation\u003c\/h3\u003e\n\u003cp\u003eReplacing bushes contributes to smoother movement in the overrun device and reduced wear on other components, which provides more controlled and stable braking performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"BPW","offers":[{"title":"Default Title","offer_id":54095903293782,"sku":"2078011","price":51.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2078011.jpg?v=1788816063"},{"product_id":"drawbar-alko-120sv-sr-sr1-b-35-2100002","title":"Drawbar ALKO 120SV SR\/SR1 B Ø35","description":"\u003cul\u003e\n\u003cli\u003eDrawbar for trailer\u003c\/li\u003e\n\u003cli\u003eFits AL-KO\u003c\/li\u003e\n\u003cli\u003eFor 120SV overrun brake in SR- and SR1-design\u003c\/li\u003e\n\u003cli\u003eDiameter Ø35 mm\u003c\/li\u003e\n\u003cli\u003eDesign B\u003c\/li\u003e\n\u003cli\u003eCheck dimensions and design before assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv\u003e\n\u003ch2\u003eDrawbar ALKO 120SV SR\/SR1 Ø35 for trailer\u003c\/h2\u003e\n\u003cp\u003eThis drawbar is intended for trailers with ALKO overrun brake and is used in the 120SV system with SR- and SR1-design where correct dimension is crucial for safe and reliable operation.\u003c\/p\u003e\n\u003ch3\u003eDrawtube that provides stable towing\u003c\/h3\u003e\n\u003cp\u003eA correctly adapted drawtube contributes to smooth movement in the overrun brake system and provides safe and predictable performance behind the towing vehicle during both braking and acceleration.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AL-KO","offers":[{"title":"Default Title","offer_id":54095903457622,"sku":"2100002","price":223.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/files\/2100002.jpg?v=1788816063"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1023\/3099\/0934\/collections\/valeryd-category-couplings.png?v=1790235587","url":"https:\/\/valeryd.com\/collections\/couplings.oembed","provider":"Valeryd","version":"1.0","type":"link"}