Lighting kits

Invest in safe lighting, you can easily switch to Valeryd’s complete lighting kit yourself. The kit includes lamps, main cabling, smart cables with connectors, suspension clips, pliers and cable ties, as well as an instruction.

A lighting kit contains:

Proceed as follows:

Start by fixing the main cable from the plug (1). Surplus cable can be secured under the chassis (2).

The two bayonet connectors are connected to the tail lights. Yellow=left (3) and green=right (4).

The smart cables run from the bayonet connectors. These are routed to the position lights that are attached to the front of trailer (5 and 6).

To install the side marking lights (7 and 8) use smart cables that are spliced with the help of smart clips and the smart clip pliers on the long smart cable. Number plate lighting (9) and other required lighting, is spliced in the same way.

Important:

• Do not make any joints to the main cable!
• Disconnect any direct chassis grounding, which is common on older trailers.